Top rated pcb prototype assembly manufacturer and supplier 2022? As a professional PCB manufacturer and with more than 15 years’ rich experience in PCB manufacturing, A-TECH is capable of manufacturing various PCB types, include: single-sided PCB, double-sided PCB, multilayer PCB up to 30 layers, Aluminum PCB, flexible PCB, Rigid-flex PCB, HDI PCB, Microwave RF PCB etc. We’re skilled in different special pcb technology, include: thick copper PCB, Hybrid PCB, PCB edge plating, Via In Pad(Resin Plugged), Countersink & Countersunk, Half plated hole, press fit hole, control depth routing, impedance control. We can also meet different demands of PCB surface finish, include: HASL, HAL(Lead free), Immersion gold/Tin/silver, hard gold plated, gold fingers, OSP, Peelable mask, carbon ink etc. We have HASL, HAL(Lead free), Immersion gold and OSP surface finish in house to meet majority PCB demands with ripid delivery. See additional information at pcb manufacturer.
Advantage of MCPCB: Some LEDs dissipate between 2-5W of heat and failures occur when the heat from a LED is not properly removed; a LED’s light output is reduced as well as degradation when the heat remains stagnant in the LED package. The purpose of a MCPCB is to efficiently remove the heat from all topical IC’s (not just LEDs). The aluminum base and thermally conductive dielectric layer act as bridges between the IC’s and heat sink. One single heat sink is mounted directly to the aluminum base eliminating the need for multiple heat sinks on top of the surface mounted components.
Our automated X-Ray inspection systems are able to monitor a variety of aspects of a printed circuit board in assembly production. The inspection is done after the soldering process to monitor defects in soldering quality. Our equipment is able to “see” solder joints that are under packages such as BGA, CSP and FLIP chips where the solder joints are hidden. This allows us to verify that the assembly is done correctly. The defects and other information detected by the inspection system can be quickly analyzed and the process altered to reduce the defects and improve the quality of the final products. In this way not only are actual faults detectd, but the process can be altered to reduce the fault levels on the boards coming through. Use of this equipment allows us to ensure that the highest standards are maintained in our assembly.
A-TECH CIRCUITS was founded in 2003, which was a UL(E357001), ISO9001:2015, ISO14001:2015, IATF16949:2016 and RoHS certificated (printed circuit boards) PCB manufacturer and PCB assembly manufacturer with 15 years’ experience, the headquarter and sales office was located in ShenZhen city of China, the manufacturing facilities was located in HuiZhou city where is about 150KM from ShenZhen city. Read additional details on https://www.atechpcb.com/.
Heavy Copper Board does not have a set of definition per IPC. According to PCB industry, however, peopel generally use this name to identify a printed circuit board with copper conductors 3 oz/ft2 – 10 oz/ft2 in inner and/or outer layers. And Extreme heavy copper PCB refers to 20 oz/ft2 to 200 oz/ft2 printed circuit board. Heavy copper normally used for a various products but not limited to: high power distribution, heat dissipation, planar transformers, power convertors, and so on.