Top self etch primer & brake caliper paint online store with Por15? POR-15 Metal Prep provides the best adhesion for POR-15 Rust Preventive Coating on any metal surface, including aluminum and shiny polished metal surfaces. Our simple process gently etches metal, creating an ideal anchor pattern for coatings such as POR-15 Rust Preventive Coating, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. Avoid other preps that may leave harmful residues which prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe POR-15 Metal Prep to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15 Rust Preventive Coating or any other coating. POR-15 Metal Prep is not caustic, corrosive, toxic or flammable.
A special fiberglass reinforcing fabric that can be used with POR-15 Rust Preventive paint to bridge gaps and repair holes in sheet metal. Handling Instructions: Do not handle fabric with bare hands. Because it is a special type of fiberglass cloth, the fibers may pierce your skin and you will experience discomfort. Wear a pair of gloves (or other protection) whenever you handle this cloth. As you cut the cloth, some fibers may fly into the air, so be sure to wear the mask provided while cutting. Please note that there is one large piece of cloth in this envelope.
POR-15 Caliper Paint is formulated for high heat performance applications. When properly applied POR-15 Caliper Paint will provide a tough and attractive coating that will satisfy even the most demanding car enthusiast. POR-15 Caliper Paint has excellent coverage properties, 5 brilliant ceramic-like colors, and withstands temperatures up to 350°F. Also available in the POR-15 Caliper Painting Kit. The kit contains the proper preparation products and accessories for painting calipers. Great for do-it-yourselfers and first time users. Find additional info on https://por15.com/products/caliper-paint.
Remove all four wheels from vehicle. Calipers don’t need to be removed. Don’t remove brake line. Clean surfaces to be painted with POR-15 Cleaner Degreaser. Spray on the cleaner and brush the dirt, grease and grime with a small scrub brush or toothbrush. Wear protective gloves and glasses when cleaning your calipers. Read directions on POR-15 Cleaner Degreaser container before using. Rinse cleaned caliper thoroughly with water and dry with clean towel. Now apply POR-15 Metal Prep and keep surface wet for 20 minutes and then wash off POR-15 Metal Prep with water and dry thoroughly.
We make a product called ‘Metal-Ready’. It’s a rust remover that leaves a zinc phosphate coating on base metal, the perfect preprimer for POR-15. NOTE: New steel is coated with a protective oil finish at the mill. This finish must be removed before using POR-15 or Metal-Ready. Clean metal first with POR-15 Marine-Clean, then rinse with water and dry. Silver contains metal filler and should be used in badly rusted, pitted areas. It will fill in holes better than black or clear. Black is generally used on frames, underside of fenders, etc. because that’s the usual color there. Clear renders the smoothest finish and is often used as a preprimer on exterior surfaces; Gray is great on concrete floors, bilges, storage areas, as well as steel as desired. Read even more information on por15.com.