Premium coriolis density meter bulk manufacturer? It has been considered in the design that the steam becomes superheated, or it is difficult to determine which state it is in, or sometimes it is superheated and sometimes saturated, so the temperature and pressure compensation is adopted, and the above phase change has no effect on the measurement results. Considering saturated steam in the design, and adopting pressure compensation, the above-mentioned phase change will bring about a small error, that is, the compensation error caused by the density difference corresponding to the difference between the superheated steam temperature and the saturated steam temperature. The design is based on saturated steam, but temperature compensation is used, that is, the temperature of superheated steam is used as the saturation temperature to check the density table, which will generally cause large errors.
To calculate the steam mass flow from the frequency signal output by the frequency output vortex flowmeter, you only need to know the current working condition of the fluid, while the temperature and pressure compensation of the analog output vortex flowmeter is only the error caused by the deviation of the current working condition from the design working condition. Compensation, therefore, not only need to know the current conditions, but also need to know the design conditions. The data of the latter working condition often causes errors due to the loss of data due to the passage of time or personnel changes. In contrast, the frequency output vortex flowmeter does not have this problem. Discover extra information on coriolis type flow meter.
The Insertion Density Meters are equiped with the microprocessors inside, so the sensor could complete the signal conditioning, calculation and diagnosis functions, and it does not need the remote eletronic devices for processing. Typical industries applied include the petrochemical industiry, electricity power industry, wine industry, food industry, pharmaceutical industry, and mineral processing (such as, clay, carbonate, silicate, etc. ) For sepecific applications, the Insertion Density Meters are largely used in the interface detection of the multi-product production lines, density detection of the mixed liquid, end monitoring of the reaction kettle, and the separator interface detection.
Second, the gas turbine flow meter equipment has strong functions, low power consumption and superior performance. When it is sold in the industry, it is found that the functional advantages of this kind of flowmeter will be more perfect. In many gas distribution stations or gas When promoting in the station, I found that the advantages will be more diversified, and there are more and more advantages. Third, the configuration of the natural gas turbine flow meter instrument is more perfect, and it will be more and more widely used. As long as you take a fancy to the above clarity, it will be more convenient in the process of normal use. After this is used in many gas distribution stations, it is found that the measurement accuracy is higher.
Thermal mass flow meters are suitable for all industrial and test platform applications that require fast, accurate gas measurement. The insertion thermal mass flow meter directly indicates the mass flow or standardized volume flow of the gas without any additional pressure and temperature compensation. They have impressive high accuracy, short response times and a very wide flow range, with almost no loss of accuracy even at the lowest flow. See more details on https://www.bjssae.com/.
Beijing Sincerity is the leader of the coriolis mass flow meters industries in China,who specialized in producing thermal mass flow meter,turbine flow meter,fork density meters and ultrasonic flow meter. In line with our collaborative approach to our customers we are also able to discuss tailor-made Service and Support Solutions designed specifically for your needs that can include such topics as training, instrument replacement agreements and instant service and repair.