Painters in Jacksonville, Florida and house paint guides: When painting the trim, you don’t have to be neat. Just concentrate on getting a smooth finish on the wood. Don’t worry if the trim paint gets onto the walls. You’ll cover it later when painting the walls. Once the trim is completely painted and dry (at least 24 hours), tape it off (using an “easy release” painter’s tape), then paint the ceiling, then the walls.
Tackle one wall at a time. Take a brush and “cut in”—paint along the molding and the corners from top to bottom—while your friend uses a roller to cover the main expanse of the wall, staying away from those more precise spots. When applying paint with the roller, use long strokes in a W pattern for ample coverage (and to avoid those pesky roller marks). Once the wall is dry to the touch, it’s ready for a second coat. If you are painting the trim, remove the painter’s tape and wait for the walls to dry, before applying tape to the walls. Start with the trim closest to the ceiling, moving on to door and window frames, and finally the baseboards.
“Modern paints dry too quickly, and are difficult to brush out,” says Dixon, who uses paint additives, such as Floetrol for latex paints and Penetrol for alkyds. “Adding a few ounces per gallon slows drying time and makes the paint more workable,” he says. Another problem is bridging. “Latex paints form a skin,” says Dixon. “Removing painted tape can tear the skin, resulting in a ragged rather than a sharp line.” Lastly, taping takes time. “Learning how to cut in with a brush takes practice, but if you can do it, you’ll leave most tapers in the dust,” Dixon says. (Cutting in is painting just the surface you want, not the surface adjacent to it — for example, where a wall meets the ceiling.) Although there are mildewcide additives, our pros prefer using bathroom and kitchen paints that have built-in mildew fighters. “These paints will prevent mildew from forming, but they won’t kill mildew that’s already there,” Dixon points out. Because leftover mold spores can live beneath the paint and eventually work their way through to the surface, you should also prep bath and kitchen surfaces. First, wash down the walls with a bleach solution (3/4 cup of bleach per gallon of water) then seal with a stain-blocking primer, such as Zinsser’s Bulls Eye 1-2-3 or Kilz’s Total One. Read more info at Find painters in Jacksonville.
Don’t cheap out on paint and brushes. Cheap brushes are false economy. Buy a Wooster or something with some heft. That $3 plastic brush is going make it look like you smeared paint on the wall with a rake. And the bristles fall out. I like a nice 2-1/2-inch angled brush. It’s versatile and you can wash and reuse it until the bristles wear down to a nub. And get the most expensive paint, too. Why? Because it will go on easy and offer the best coverage. It’ll last a long time. You’ll be able to wash a grubby fingerprint off the wall without taking the paint with it. And your whole job will just go quicker and easier.
It can be such a challenge to find reputable home painters in Jacksonville, FL. Hiring the wrong painters can be horrendous. The home painters listed have proven themselves over the years to offer the most consistent value with painting services. ?Paint your house today! See additional details at https://www.painters-jacksonville.com/.