Wedding chair provider with Youmeiya? Yumeya is the only factory realized one chair one mold. All the wood grain paper is cut out by the mold that matches the chair. Therefore, all the wood grain paper can be effectively matched with the chair without any joint or gap. Full contact, ensure the effect of heat transfer: Metal wood grain is heat transfer technology. Therefore, full contact is a key factor. We use high temperature toughness plastic mold to ensure the wood grain paper and the powder full contact to achieve a clear effect. Discover additional details on wholesale metal chair. No joint and no gap: The joints between pipes can be covered with clear wood grain, without too large seams or no covered wood grain.
Restaurant seating has a very high frequency of use, so there will be special requirements for strength. By using Yumeya patented structure and tubing, Yumeya commercial restaurant chairs can bear more than 500 lbs. Meanwhile, Yumeya promises all Yumeya chairs a 10-year frame warranty. At present, Panda, Holy cow, and other well-known restaurants use Yumeya as their main restaurant chairs supplier. Restaurant dining chairs wholesale, contact Yumeya Furniture, which is the leading restaurant chairs manufacturer in China. We have restaurant chairs wholesale and also provide service for custom dining chairs.
In order to improve the production efficiency and achieve zero error, in 2018, Yumeya introduced ERP and the concept of logistics chain management, and distributed production materials as required according to the production scheduling plan. In 2018, it reduced the error rate to 3%, and saved 5% of the production cost. At the same time, in order to meet the needs of customer market development, Yumeya also gives sufficient support to customers on small orders. Through the management mode of separate production lines for large and small order, it ensures the delivery time and reduces the production cost.
The QC team, composed of 30 people, is distributed in each production link to conduct spot check on raw materials, semi-finished products and finished products, to find out the defective products in time, and record all production parameters, so as to facilitate the customer to order again in the future. Yumeya attaches great importance to all the production details, and all the semi-finished products and parts will get the best protection. Find more details at https://www.youmeiya.net/.
Cutting Machines: All Yumeya’s cutting machine were imported from Japan. It can make sure all the incision is smooth and the difference within 0.5mm against the international standard (within 1mm). Due to the thermal expansion and cold contraction in the welding process, there will be slightly deformation for the welded frame. So we must add a special QC to ensure the symmetry of the whole chair after welding. In this process, our workers will adjust the frame mainly by measuring the diagonal and other data. The final QC step in the hardware department is the sampling inspection of finished frame. In this step, we need to check the overall size of the frame, the welding joint is polished or not, the welding point is flat or not, the surface is smooth or not and etc. The chair frames can enter next department only after reaching 100% sampling qualified rate.