Here are several advices about how to maintain your hot tub and also a recommandation if you live in Colorado. Sometimes people lower the water temperature set point dramatically, usually to cool the water in the summer. The next thing they know, they are struggling to maintain water purity, and they think something is wrong because their spa no longer filters.
Your daily maintenance tasks are all about ensuring good water quality. In a hot tub that means checking two things: PH and sanitizer levels. This is easy stuff, and can generally be accomplished by dipping a single, color-coded test strip into the water to check that everything is as it should be. If you’re diligent about maintaining your tub, most days this won’t mean doing anything more than walking out to your tub, dipping the test stick in the water, and heading back inside. If your PH or sanitizer levels need adjusting, however, you’ll need take an extra few minutes to dump the proper additive into your water to get things back their proper levels. Doing so will prevent a host of problems, including scaling, mineral buildup, corrosion, skin irritation, and cloudy and stinky water.
Advices for purchasing a hot tub : Get a better perspective for how your spa will fit by using rope or garden hose. Make an outline the size of the hot tub you want. Leave room for access to the equipment, steps and a cover lifter.
One of the most important things you can do to increase the longevity of your spa cover is to remove it at least twice per week. Use a spa cover lifter to completely remove it, or if you don’t have a spa cover lift, gently place it off the spa. Give your cover a few hours to breathe and shake off some of the constant heat and moisture. This is also a good time to add chemicals or shock the spa if you aren’t using it at the time.
The spa filter can be under the skimmer basket accessed from inside the spa, or it can be a small tank that is opened up underneath the spa. You’ll need to locate it first in order to clean or replace the filter during your spa care routine. If underneath the spa, you may have a valve that can be shut to prevent water from rushing out when you open the filter. Loosening a large nut or just turning the filter body counter clockwise is the usual method to access the filter cartridge. Some water spillage is inevitable when opening it up, but if you are careful it can be very little. Read more details at Hot tubs advices.