Looking to buy high quality corrugated flexible conduit? Here are some advices and extra details helping you to make the best choice.
Conduit is a type of tubing that you can feed your cable through, it can be made up of plastic, fibre or metal. Electrical conduit can provide the structure, cable protection and support for the cable you run through it. Electrical conduit is a safe and tidy solution when installing single or bunched cable together. Cable conduit is the perfect solution to support the installation of electrical cable, running cable underground, through walls or when cabling needs protection in an exposed area.
Intermediate Metallic Conduit or IMC is lighter weight, metallic conduit and is rated as stronger than other rigid conduit. IMC was first produced by Allied Tube & Conduit. IMC, provided in both threaded IMC and non-threaded IMC forms, is a rigid metallic conduit tubing, typically hot-dipped galvanized steel or stainless steel. The interior of galvanized steel IMC is usually coated with an anti-corrosion layer. Threaded IMC is joined by threaded couplings, C condulets, sweeps and bends. The tubing is cut with a pipe cutter or tubing cutter, and then threads cut using a thread cutting tool. When cutting IMC, take care to remove burrs on the tubing interior that would otherwise damage electrical wires being pulled through the conduit. Read extra details at Stainless steel flex conduit.
Electrical metallic tubing, or EMT, is the most common type of conduit for exposed interior installations, such as in a basement or an unfinished garage or workshop. It is the lightest and thinnest of the rigid metal conduit types and comes in a few different diameters; 1/2-inch is the most standard size for household circuits. EMT is also called “thin-wall” and is relatively easy to bend with a tool called a conduit bender. EMT is permitted by the National Electrical Code (NEC) for dry and wet locations but requires special watertight fittings and connectors in wet locations. With proper installation, EMT raceway can serve as a circuit ground path and be used in place of a separate ground wire running inside the conduit.
The liquid tight flexible non-metallic conduit (LNFC) is really a reliable option for a wide range of applications. It is built to be really hard-wearing and protective having the ability to give defense against water and flames. Plus, certain LNFC may be manufactured with multiple layers to provide extra strength. This is basically the most practical form of Plastic Flexible Conduit Fittings to make use of in locations which might be seen as potentially hazardous.
The term “electrical conduit” refers to durable tubing or other types of enclosure used to protect and provide a route for individual electrical wiring conductors. Conduit is typically required where wiring is exposed or where it might be subject to damage. A conduit can be made of metal or plastic and may be rigid or flexible. All conduit is installed with compatible fittings (couplings, elbows, connectors) and electrical boxes, usually made of the same or similar material. Conduit must be installed in accordance with the National Electrical Code (NEC) and all applicable local code rules.
CorrugatedConduit.com is a leading supplier of flexible conduit located in Kowloon, China. We have 15 years cooperating qualified manufacturer in mainland. Because of our good quality control management and large volume we are able to sell you the best flexible conduit at competitive prices. Source: https://corrugatedconduit.com/.